• Wish to place a new medical device on the European market?

  • Unsure about the product classification?

  • Need to identify an appropriate conformity assessment route to the CE mark?

  • Concerned about selecting a Notified Body?

  • Need to prepare the Technical File?

  • Need to comply with post-market requirements?


All medical devices placed on the market in Europe must comply with one of the European Directives for medical devices, namely the Medical Device MDR 2017/745, the In Vitro Diagnostic Directive 98/79/EC, or the Active Implantable Medical Device Directive 90/385/EEC, and carry the CE mark as the legal indication of compliance.


In fact, ‘CE’ is an abbreviation of 'Conformité Européenne', and may be found on many other items to indicate compliance with the European directive or directives that apply to that specific type of product including, amongst others, machinery, electrical/electronic equipment, pressure vessels and personal protective equipment. The CE mark allows the products to be marketed in the EU without trade restrictions.


The mark is affixed by the manufacturer to the product after completing an appropriate conformity assessment process.


For medical devices, the routes available for manufacturers to obtain the CE mark depend on a number of factors, including risk classification, type of product, internal quality management system and human/technical resources. For higher risk devices, the CE mark can be affixed only after involvement of a Notified Body, to either verify compliance of the product with the Directive’s ‘Essential Requirements’ and/or the manufacturer’s quality system with regulatory requirements.


Once your device is on the market, additional requirements apply in relation to the reporting of adverse incidents to the Competent Authorities designated by each EU member state.


GEMAR can help your company comply with these often complex European requirements, including answering questions such as:


  • Is my product a Medical Device?

  • If so, what is its classification?

  • How do I show it complies with the Essential Requirements?

  • How do I construct a Technical File?

  • What must I do to meet the risk management requirements?

  • Does compliance with international/national standards help?

  • How do I prepare a clinical evaluation report?

  • Do I need a Notified Body?

  • If so, how do I select one?

  • Do I need a certified quality management system?

  • Does my device labelling meet the requirements?

  • What do I need to do if I assemble kits or procedure packs?

  • What should be included on my Declaration of Conformity?

  • What are my post-market surveillance and reporting obligations?


The AIMDR and MDR were amended by a revising directive that took effect in 2010 and which affected a number of important aspects of implementation, without a formal transition period. In addition, no 'grandfathering' is allowed, so all devices, even those that have been CE marked for a number of years, have to be shown to meet the revised requirements. Probably the two most important revisions are the confirmation that clinical data must be provided for all classes of device, unless justified, and that 'usability' data is also now required. GEMAR can advise you how these more recent requirements are likely to affect your devices and business.


GEMAR provides a fully comprehensive service to help you market your medical devices in Europe, from simply answering one of the above questions to a significant involvement in quality system assessment, technical file preparation, including standards identification, Essential Requirements compliance, risk analysis, clinical evaluation and manufacturing documentation, together with post-market surveillance and reporting.


For more detailed information on the requirements for medical device CE marking for Europe, please use the submenu in the left-hand panel.


Feel free to contact us and see how we can assist you.